3 Series E46 320i (M52TU) TOUR
24 12 105
Replacing radial sealing ring for manual shift
valve shaft (A4S 270R/310R)
Note:
Remove transmission underbody protection if necessary.
After completing work, adjust shift mechanism
refer to 24 00 005.
Cable clamping up to 8.95:
Unfasten nut (1) in setting "P".
Caution!
Always brace bolt with special tool 24 5 210 to avoid
deformation of the cable.
Special tool 24 5 210 can only be fitted in position "P".
Installation:
Tightening Torque,
refer to Technical Data 25 16 2AZ.
Cable clamping from 8.95:
Brace clamping bush (1) and loosen nut (2).
Installation:
Tightening Torque,
refer to Technical Data 25 16 2AZ.
Brace cable at hexagon (1), loosen nut (2) and remove cable from
brace (3).
Installation:
Tightening Torque,
refer to Technical Data 25 16 1AZ.
RA Replacing radial sealing ring for manual shift valve shaft (A4S 270R/310R)
BMW AG - TIS
13.02.2013 02:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -