3 Series E46 320i (M52TU) TOUR
Straighten and grind connection points.
Remove foam residue from cavity sealing.
Determine and cut cutting lines on cover for side member spare
part.
Determine outside B-pillar cutting line:
Measurement (A) = 390 mm from upper hinge fixture.
Determine and mark cutting line for cover for front side member:
Measurement (A) = 150 mm.
1 = 1st bore for finishing strip, entrance
1 = 2nd bore for finishing strip, entrance
Determine and mark cutting line for cover for rear side member:
Measurement (A) = 50 mm from center of bore for finishing strip,
entrance (1) with dia. 5.5 mm.
Measurement (B) = 165 mm from center of bore for panel for
cover on side member (2) with dia. 9.2 mm.
Cut through marked cutting lines.
RA Replacing cover for side member, left or right (partial replacement, B-pillar be
BMW AG - TIS
13.02.2013 06:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -