3 Series E46 320i (M54) TOUR
and could therefore easily fall out, it is advisable to fix the damping pieces in the
holes with copper paste.
- Install new gaskets with heat shield. Take care to ensure that the heat shield is in firm
contact with the damping pieces in the area of the moulding provided.
Parts:
Description
Part number
Quantity
Gasket with heat shield
11 62 7 522 585
2
Damping piece
11 62 7 522 386
2
Hexagon nut
11 72 1 437 202
16
Flat seal
18 10 7 502 346
2
Hexagon nut
18 30 1 737 774
4
The following parts are also required, depending on vehicle model:
E36/7 and E39:
Description
Part number
Quantity
Hexagon bolt for steering
spindle
32 31 1 122 041
2
E46 (coupé from 11/99, all convertibles, all E46 from 12/2000):
Description
Part number
Quantity
Torx bolt for steering spindle 32 30 1 094 718
2
Hexagon bolt with flange for
reinforcement plate (if fitted)
51 71 7 892 988
8
Reimbursement:
Material and labour costs incurred can be claimed through the usual warranty channels
subject to current warranty terms.
Defect code
11 62 90 39 00
The defect code is not contained in the official
Defect Code Catalogue but has been included in
the system, thus enabling warranty claims to be
processed.
Replace gasket with heat shield.
Within the scope of a visit to the workshop:
Job number
00 53 835
Labour
38 FRUs - E36/7 (Z3)
45 FRUs - E39
43 FRUs - E46/2/3/4/5
44 FRUs - E46 convertible
In case of order without additional repair
operations:
Job number
00 53 301
Labour
SI M54 RHD - Exhaust manifold gasket with heat shield E36 E39 E46 M54
BMW AG - TIS
13.02.2013 01:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -