3 Series E46 320i (M54) TOUR
13 54 250
Replacing intake hose (between air-mass flow
sensor and connecting piece) (M54)
Switch off ignition.
Unlock plug (1) and detach from air-mass flow sensor.
Detach vacuum line (2) from intake hose.
Release hose clamp (3).
E39:
withdraw intake hose from resonator.
Remove intake hose together with air-mass flow sensor.
Installation:
Check sealing ring (1) between air-mass flow sensor and intake
filter housing for damage, replace if necessary.
Coat sealing ring (1) with acid-free grease.
If intake hose is replaced:
Insert air-mass flow sensor in new intake hose.
RA Replacing intake hose (between air-mass flow sensor and connecting piece) (M54)
BMW AG - TIS
13.02.2013 05:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
