3 Series E46 320i (M54) TOUR
Installation:
Check seals (1), replace if necessary.
Release screw (1) and remove exhaust bracket.
Installation:
Slacken screws (2).
After complete installation of exhaust system, align exhaust carrier
so that it is free from tension.
Tighten down screws (2).
Saloon/Sedan, Coupé:
Release screws (1) and remove reinforcement plate (2).
Release screws (3). Reinforcement plate (4) is connected to
exhaust system via rubber mounts and does not have to be
removed.
Convertible:
Release screws and remove body reinforcement strut (1).
RA Removing and installing complete exhaust system (M54)
BMW AG - TIS
13.02.2013 06:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
