3 Series E46 320i (M54) TOUR
Installation:
The pin is coded by a straight surface (1).
The coding points upwards.
Screw pin with coding upwards. Turn slightly until coding snaps
into place. Press in pin until engaged (2).
Unfasten screws.
Detach retainer (1) with a screwdriver (2).
Note:
Do not soil the footwell carpet with brake fluid.
Detach clutch master cylinder (3) from hydraulic line and remove
with supply hose.
Lever out shift element (1) from clutch master cylinder (2) with
screwdriver.
Release plug connection (3) and disconnect plug (4) from shift
element (1).
RA Removing and installing/replacing clutch master cylinder
BMW AG - TIS
13.02.2013 06:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -