3 Series E46 320i (M54) TOUR
Unfasten grooved nut (1) with special tool 24 1 170.
Installation:
Tightening Torque,
refer to Technical Data 24 13 1AZ.
Remove transmission extension from special tool.
Remove output flange from mounting.
Installation:
Coat sealing lip of radial seal and sealing surface of output
flange with transmission oil.
Lift out radial seal (1).
Installation:
Drive in new radial seal (1) flush using special tool 00 5 500
/ 24 1 190.
RA Replacing radial seal for output flange (A5S 325Z)
BMW AG - TIS
13.02.2013 07:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
