3 Series E46 320i (M54) TOUR
Grip cable at hexagon head (1).
Unscrew nut (2).
Remove cable from bracket.
Installation:
Tightening torque: 25 16 1AZ
.
Unscrew nut (1).
Remove gearshift lever (2).
Installation:
Tightening torque: 24 51 1AZ
.
Unfasten screws.
Detach position switch from manual shift valve shaft.
Installation:
Pay attention to locating pin and cable routing.
RA Removing and installing/replacing position switch (A5S 325Z)
BMW AG - TIS
13.02.2013 07:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
