3 Series E46 320i (M54) TOUR
24 35 550
Replacing pulse generator (turbine speed)
(A5S 360R / 390R, A4S 200R)
Important!
After completion of work, check transmission fluid level.
Use only the approved transmission fluid.
Failure to comply with this requirement will result in serious
damage to the automatic transmission!
Necessary preliminary tasks:
•
Remove transmission oil sump.
Pull off plug (1).
Release screw (2).
Tightening torque 24 34 4AZ .
Withdraw pulse generator (3).
Read out fault memory of EGS control unit. Check stored fault
messages, eliminate faults and then clear fault memory.
RA Replacing pulse generator (turbine speed) (A5S 360R / 390R, A4S 200R)
BMW AG - TIS
13.02.2013 07:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
