3 Series E46 320i (M54) TOUR
41 62 014
Adjusting trunk lid to fit (touring)
Note:
Engine hood was fitted and bolted in an unfinished body
shell.
Unpainted surfaces become visible after subsequent
movement.
These surfaces must be touched up with paint in the body
color.
Open tailgate.
Open trunk lid.
Remove panels in rear lid,
refer to 51 49 000.
Partially remove trims in rear lid,
refer to 51 49 007.
Remove and install rear spoiler,
refer to 51 71 412.
-
Preliminary work:
Check side rear lid buffers in body on left and right for damage,
repair if necessary.
Replace side buggers:
Note:
Make sure lock nuts do not drop behind D-pillar panel.
Do not damage paint.
RA Adjusting trunk lid to fit (touring)
BMW AG - TIS
13.02.2013 12:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
