3 Series E46 320i (M54) TOUR
Feed out rubber grommet (1) on left/right.
Release nut (2) on left/right and detach cable (3).
Note:
This work step must be carried out with a second person
assisting.
Loosen left/right screws (1).
If spacers are fitted, remove them and make a note of number.
Release screws (1) on left/right and remove rear window (2).
Place rear window (2) on a clean surface.
Caution!
The rear window (with frame) must not be pulled or lifted by its
plugs, wires or foil conductor (risk of damage).
Installation:
Replace retainer inserts (1).
Replace rubber mounts (2).
Install rear window (1) and fix in place with screws (2).
Gap dimensions of rear window,
refer to 41 00 ...
Adjustment of rear window,
refer to 41 62 014.
RA Removing and installing rear window (touring)
BMW AG - TIS
13.02.2013 14:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
