bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

2 RA Removing And Installing_replacing All Trims For Rear Lid (Touring)|Page 2500 > < 2 RA Removing And Installing_replacing All Trims For Rear Lid (Touring)|Page 2498
Page 4
background image

(D) Trim on rear lid, inside side:

Remove trunk lid trim panel,

refer to 51 49 000.

Lever out clips (1) with special tools 00 9 317.

Feed trim (2) out of swallow-tail guides (3) of center trim (4).

Installation:

If necessary, replace faulty connector inserts (1).

Installation:

Following parts of trim (1) must not be damaged:

2

Clip mounts

3

Mounts for swallow-tail guide

(E) Trim on rear lid, inside center:

Release trim on rear lid, inside side, left/right,

refer to (D).

Lever out clips (1) of trim (2) with two special tools 00 9 317.

RA  Removing and installing/replacing all trims for rear lid (Touring)

BMW AG - TIS

13.02.2013  14:52

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 4 -

2 RA Removing And Installing_replacing All Trims For Rear Lid (Touring)|Page 2500 > < 2 RA Removing And Installing_replacing All Trims For Rear Lid (Touring)|Page 2498