3 Series E46 323Ci (M52TU) COUPE
22 11 001
Replacing right engine mount (M52)
Remove front splash guard.
Remove front end reinforcement.
Remove lower section of microfilter housing.
Release nut (1) on right engine mount.
Release nut (1) on left engine mount.
Raise engine with special tool 00 0 200,
described in Removing oil sump.
Release screw connection for engine mount at bottom right.
Tilt engine mount out to one side and remove.
RA Replacing right engine mount (M52)
BMW AG - TIS
13.02.2013 07:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -