3 Series E46 323Ci (M52TU) COUPE
23 21 006
Replacing output flange for transmission
(S5D 200G / 250G)
Special tools required:
•
23 0 020
•
23 1 210
•
33 1 150
Important!
After completion of work, check transmission oil level.
Use only approved transmission oil.
Failure to comply with this instruction will result in serious
damage to the transmission.
Necessary preliminary tasks:
•
Unflange propeller shaft and tie up to one side
•
If necessary, remove heat shields.
•
Support transmission.
Release screws on cross-member.
Tightening torque: 23 71 2AZ
.
Lower transmission.
RA Replacing output flange for transmission (S5D 200G / 250G)
BMW AG - TIS
13.02.2013 07:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -