3 Series E46 323Ci (M52TU) COUPE
24 33 510
Replacing solenoid valve 1, 2 or 3 (A5S 360R /
390R, A4S 200R)
Important!
After completion of work, check transmission fluid level.
Use only the approved transmission fluid in this automatic
transmission.
Failure to comply with this requirement will result in serious
damage to the automatic transmission!
Necessary preliminary tasks:
•
Remove transmission oil sump.
Disconnect plug from solenoid valve.
Remove retaining spring and withdraw solenoid valve (1, 2 or 3).
Installation:
Coat new solenoid valve with automatic transmission fluid.
Caution!
Note position of wiring harness.
Note:
Allocation of solenoid valves (SV):
1
SV switching 1-2
2
SV switching 2-3
3
SV switching 4-5
RA Replacing solenoid valve 1, 2 or 3 (A5S 360R / 390R, A4S 200R)
BMW AG - TIS
13.02.2013 08:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -