3 Series E46 323Ci (M52TU) COUPE
32 41 061
Replacing power steering vane pump (M52TU
/ M54 / M56)
Important!
Observe vane pump nameplate.
A vane pump of the same type must be installed on account
of the altered hydraulic lines.
Possible types:
•
LF20
•
LF30
Important!
Adhere to the utmost cleanliness. Do not allow any dirt to
enter the hydraulic system.
Seal off pipe connections with plugs.
Necessary preliminary tasks:
•
Draw off and dispose off hydraulic fluid from fluid reservoir
Observe country-specific waste-disposal regulations
•
Remove underbody protective plate
•
Remove belt pulley
Disconnect suction and pressure lines from vane pump.
Installation:
Replace sealing ring.
Tightening torque 32 41 3AZ
.
RA Replacing power steering vane pump (M52TU / M54 / M56)
BMW AG - TIS
13.02.2013 10:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -