3 Series E46 325Ci (M54) COUPE
Unscrew nut (1).
Installation:
Tightening torque 12 41 4AZ
.
Disconnect battery positive lead (2) from starter motor.
Remove battery positive lead.
E39 only:
Release screw connection of battery positive lead (1) (floorpan).
Release nut on starter motor (3).
Installation:
Tightening torque 12 41 4AZ
.
Detach battery positive lead (1) from holder (2).
-
Read out fault memory of DME control unit
-
Check stored faults
-
Rectify faults
-
Clear fault memory
RA Replacing battery positive lead (between starter motor and alternator) (M54 / M5
BMW AG - TIS
17.02.2013 14:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -