3 Series E46 325Ci (M54) COUPE
Knock back cotter pin in grooved nut.
Installation:
Peen grooved nut to secure.
Release slotted nut (1) with special tool 24 1 170 .
Tightening torque: 24 13 1AZ
.
Remove transmission extension from special tool.
Remove output flange from mounting.
Installation:
Coat sealing lip of radial seal and sealing surface of output
flange with ATF.
Installation:
An end float of 0.15 ... 0.35 mm is required between parking
interlock gear and end face of output flange. End play is adjusted
with shim (1).
Replace sealing ring.
RA Replacing output flange (A5S 325Z)
BMW AG - TIS
17.02.2013 16:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -