3 Series E46 325Ci (M54) COUPE
Release screws (1) on impact absorber on left/right.
Installation:
Tightening Torque,
refer to Technical Data 51 11 2AZ.
Pull bumper back a little.
Disconnect plug connection (1) for fanfare horn on left/right.
Version with fog lamps:
If necessary, disconnect plug connection (2) for fog lamps on
left/right.
Remove bumper (3).
Installation:
Height of bumper is adjusted by turning hexagon socket head
screw (1) on impact absorber (2).
Ideal adjustment:
Gap (A) should be uniform along the full length between bumper
and aperture in body.
Dimension (A) = 5
±
1 mm
RA Removing and installing front bumper completely (Coupé)
BMW AG - TIS
17.02.2013 23:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -