3 Series E46 325Ci (M54) COUPE
Note:
The picture does not match the replacement unit, the
replacement unit has Phillips screws.
-
Install actuating unit.
-
Press screws (1) and (2) out of hexagon head to seat center
and screw down.
Tightening torque,
refer to Technical Data 51 12 8AZ .
Adjust longitudinal seat setting:
-
Compress unlocking plates (1) and (2) on seat runner on
left/right with gripping pliers (3) (free of play)
Adjust longitudinal seat setting:
-
Push new coupling link (1) (adjustment lever) onto threaded
rod (3) and secure with expansion rivet (2)
Adjust longitudinal seat setting:
-
Press actuating lever (1) for longitudinal seat adjustment
downwards and press together locking clip (3) on coupling
link (4)
(coupling link (4) is now firmly connected to threaded rod (2))
-
Install front seat in the car.
-
If necessary, release expansion rivet (5) and readjust by
turning coupling link (4)
RA Removing and installing / replacing controls on left / right front seat (normal
BMW AG - TIS
18.02.2013 01:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -