3 Series E46 325Ci (M54) COUPE
Slacken screws (1) on left/right.
Note:
For adjustment, only slacken screws (1) to such an extent that
glass sunroof lid (2) is still just adjustable.
To remove glass sunroof lid (2), release screws (1) completely.
Height adjustment:
Adjust height of lid (1) to roof (2) with special tool
00 9 315
(gap wedge).
Press glass sunroof lid at front and rear upwards/downwards until
ideal position is obtained.
Distance adjustment:
-
Slide glass sunroof lid forwards/back until ideal position is
obtained.
-
Tighten down screws.
Tightening torque, 54 12 2AZ.
-
Check function and adjustment.
Replace screws (1) when removing and installing glass sunroof
lid (2).
Installation:
Tightening torque, 54 12 2AZ.
Installation:
Initialize sunroof.
RA Adjusting glass slide/tilt sunroof lid
BMW AG - TIS
18.02.2013 02:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -