3 Series E46 325Ci (M54) COUPE
61 71 061
Replacing fluid tank for windshield washer
system
Note:
Drain fluid tank for windshield washer system
N42 only:
Remove intake hood.
Disconnect plug connection (1).
Release screw (2).
Unclip heat shield (1) in direction of arrow from lug (2) and place
to one side.
Installation:
Make sure heat shield (1) is correctly engaged.
Version without headlight cleaning system:
Turn washer pump (1) in direction of arrow, lift out of water
reservoir for windshield washer system (2) and place to one side.
Lift out water reservoir for windshield washer system (2).
Version with headlight cleaning system:
RA Replacing fluid tank for windshield washer system
BMW AG - TIS
18.02.2013 03:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -