3 Series E46 325Ci (M54) COUPE
86 21 ...
Removing roof railing adapter
Note:
Removing roof railing,
refer to 86 21 ... Removing roof railing
Remove molded sealing part (1).
Installation:
All molded sealing parts must rest flat on hood. Molded
sealing parts are marked according to their position.
Cut butylene tape (1) out of railing adapter (2) along dotted
line (3) with a knife.
Installation:
Use butylene tape, 5 mm round, for sealing railing adapter
on hood roof.
Railing adapters at front and rear: Release screws (1) from inside
of hood. Pull out railing adapter (2) and spacer plate (3) towards
bottom.
Installation:
Use new screws. Coat all screws with OKS 90 thread locking
adhesive. Install spacer plate (3) in its original position.
Tightening Torque for railing adapters at front and rear,
refer to Technical Data 86 21 3AZ.
RA Removing roof railing adapter
BMW AG - TIS
18.02.2013 06:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -