3 Series E46 325Ci (M54) COUPE
31 35 Stabilizer Bar
Type
Thread
Tightening specification
Measure
1AZ Retaining bar for stabilizer to front
axle carrier / body
E21
50 Nm
E12, E24 / until
5.82
45 Nm
E36, E46, E39,
E52, E85, E86
M8
tighten in normal position
21 Nm
E65, E66, E67
Replace nuts
28 Nm
E60, E61, E63,
E64
Replace nuts
30.5 Nm
E83
M10 10.9
56 Nm
2AZ Stabilizer to control arm
E21
tighten in normal position
130 Nm
3AZ Stabilizer link to control arm and
stabilizer
E23
M8
tighten in normal position
25 Nm
E23
M10
tighten in normal position
50 Nm
4AZ Stabilizer link to control arm
E34 / Four
Wheel Drive
22 Nm
5AZ Stabilizer link to stabilizer
E34 / Four
Wheel Drive
78 Nm
E38, E46, E83
65 Nm
E85, E86
M10
58 Nm
6AZ Stabilizer link on spring strut shock
absorber and stabilizer
E28
(yellow
chrome-
plated)
30 Nm
E24 / from
5.82, E28 /
from 5.82
(white
chrome-
plated)
33 Nm
E24 / from
5.82, E28, E31,
E32, E34
(yellow)
(wrench surface on ball
head must be parallel to
absorber axle)
59 Nm
7AZ Stabilizer link on spring strut shock
absorber and stabilizer
AZD Stabilizer Bar
BMW AG - TIS
18.02.2013 10:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -