3 Series E46 325Ci (M56) COUPE
5. Fit the support (2) to the direction-indicator lamp, as illustrated. The shape of the support
prevents skimming and thus simplifies the fitting of the direction-indicator lamp with the
support.
6. Reassemble the direction-indicator lamp.
7. Screw in the retaining bolt, leaving about 1 cm protruding.
8. Refit the direction-indicator lamp.
Note:
If the direction-indicator lamp cannot be fitted, or can only be fitted with difficulty,
loosen the headlight. After this, the headlight must be readjusted.
Please refer to repair instructions "Adjusting headlights",
RA 63 10 004.
9. Tighten the direction-indicator lamp retaining bolt with a torque of 1.5 Nm.
Parts:
Description
Part number
Quantity
Support, left
63 13 6 924 541
1
Support, right
63 13 6 924 542
1
Direction-indicator lamp with
support, left
Please refer to the electronic
parts catalogue (EPC)
1
Direction-indicator lamp with
support, right
Please refer to the electronic
parts catalogue (EPC)
1
Reimbursement:
Material and labour costs incurred can be claimed through the usual warranty channels
subject to current warranty terms.
Defect code
63 13 91 22 00
This defect code is not contained in the official
Defect Code Catalogue but has been included in
the system, thus enabling warranty claims to be
processed.
Within the scope of a visit to the workshop -
Replace one direction-indicator lamp and retrofit
one support:
Job number
00 53 660
Labour
4 FRUs
Within the scope of a visit to the workshop -
Replace one direction-indicator lamp, retrofit one
support and adjust headlights:
Job number
00 53 662
Labour
6 FRUs
Within the scope of a visit to the workshop -
Replace both direction-indicator lamps:
Job number
00 53 661
Labour
3 FRUs
Within the scope of a visit to the workshop -
Replace both direction-indicator lamps and adjust
headlights:
SI Front direction-indicator lamp loose E46 coupé, convertible:
BMW AG - TIS
13.02.2013 14:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -