3 Series E46 325Ci (M56) COUPE
Fit special tool 11 3 260 to cylinder head and screw into spark
plug threads in cylinders 1 and 4.
Turn the eccentric shaft to tension the bearing caps.
Tighten down bearing cover.
Tightening torque, 11 31 1AZ
.
Remove special tool 11 3 260 .
Important!
Do not damage the cylinder head.
If necessary, machine open-end wrench accordingly.
Align camshafts with open-end wrench.
Fit special tool 11 3 240 to camshafts on cylinder 6. Align
camshafts so that special tool 11 3 240 rests without gaps on
cylinder head.
RA Replacing camshaft (M52TU / M54 / M56)
BMW AG - TIS
13.02.2013 19:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 10 -