3 Series E46 325Ci (M56) COUPE
Secure crankshaft with special tool 11 2 300 in TDC firing
position of 1st cylinder.
Important!
Do not turn the engine back.
Remove special tool 11 2 300 before starting engine.
Automatic transmissions only:
Illustration does not show automatic transmission.
Important!
On engines with automatic transmissions, there is shortly
before the special tool bore (1) a large bore (2) which can
be confused with the special tool bore (1)
If special tool 11 2 300 is secured in the correct bore (1), the
engine can no longer be cranked at the central bolt.
Unscrew studs.
Place special tool 11 3 240 on camshafts.
RA Checking camshaft timing (M52TU / M54 / M56)
BMW AG - TIS
13.02.2013 20:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -