3 Series E46 325Ci (M56) COUPE
Pull locking clip (1) upwards and detach coolant hose from
expansion tank.
Installation:
Check sealing rings. Do not under any circumstances coat sealing
rings with antiseize agent before installation.
Unlock and disconnect plug connection (1) at level sensor.
If automatic transmission is fitted:
Pull lock (1) upwards and remove heat exchanger towards rear.
Installation:
Press lock (1) downwards before pushing on heat exchanger.
The lock must snap audibly into place when the heat exchanger is
forced on.
If automatic transmission is fitted:
Installation:
Check sealing rings, replace if necessary.
RA Removing and installing radiator (M52TU, M54, M56)
BMW AG - TIS
13.02.2013 22:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -