3 Series E46 325Ci (M56) COUPE
34 10 014
Adjusting handbrake
Perform inspection in the following manner:
When 1st tooth is engaged, no braking effect should be
present.
The difference on wheel circumferential forces (left / right
wheel) must not deviate from larger value by more than
30% (measured on the roller test rig).
In event of larger deviations of wheel circumferential force:
Carry out readjustment.
It should be possible to hold vehicle with handbrake.
The handbrake must be readjusted whenever the actuation
stroke is greater than 10 teeth.
Note:
Handbrake can only be adjusted correctly if handbrake cables
and all moving parts of handbrake move easily and function
correctly.
Basic handbrake adjustment is necessary when:
-
Replacing handbrake shoes.
-
Replacing brake disks.
-
Resetting adjustment unit.
-
Excessive actuation stroke (10 teeth).
-
Replacing handbrake Bowden cables.
1.
Setting instruction for brake shoes (basic setting)
Lift out dust cover.
Release self-locking nuts on Bowden cables until tension is
completely released.
Use a tubular hexagon box wrench or a long socket for this task.
RA Adjusting handbrake
BMW AG - TIS
14.02.2013 01:17
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -