3 Series E46 325Ci (M56) COUPE
51 11 156
Removing and installing front bumper trim
(M3 / lightweight design)
Release screws (1) and expansion rivet (2) on left and right.
Note:
Lever out catch (3) for removal.
Release screws (1) on left and right.
Lift out side wheel arch liner (2) on left and right.
Unclip bumper straight to front (plug connection).
Disconnect left plug connection (1) and unclip from bumper.
Disconnect left and right plug connections (2).
Remove bumper.
RA Removing and installing front bumper trim (M3 / lightweight design)
BMW AG - TIS
14.02.2013 07:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
