3 Series E46 325Ci (M56) COUPE
Caution!
Check emergency function.
Vertical adjustment (retraction depth):
To measure retraction depth:
-
open front door
-
Attach special tool 51 3 080 to door window glass
-
Close front door and door window glass
To adjust retraction depth:
-
Open front door and door window glass
-
Lever out rubber plug at bottom
-
Adjust with a commercially available TORX T20
Ideal adjustment:
Dimension (C) is measured at center of A-pillar.
B = min. 3 mm; max. 4 mm
C = min. 3 mm; max. 4 mm
Note:
First adjust rear slider.
If necessary, also adjust front slider.
Lower door window glass.
Lever out rear rubber plug on door base.
Vertical adjustment is adjusted by way of bore (1) in front door at
rear slider (3).
Turn Torx screw (2) until ideal adjustment is reached.
Installation:
Insert rubber plugs.
RA Adjusting front left or right door window glass (coupé, convertible)
BMW AG - TIS
14.02.2013 10:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -