3 Series E46 325Ci (M56) COUPE
Release rear retaining screw (1).
Note:
Bolt is held in end fitting (2) by retaining disk.
Installation:
Tightening torque,
refer to Technical Data 72 12 4AZ
View of rear retaining screw with end fitting of ITS head airbag
1.
End fitting of ITS head airbag
2.
Lock washer
3.
Retaining screw, rear
Unscrew bolt (1).
Push retainer on B-pillar towards top.
Remove retainer on B-pillar towards front.
Installation:
Tightening torque,
refer to Technical Data 72 12 14AZ
During installation, ensure that retaining lug is correctly seated
in body.
View of ITS head airbag retainer
1.
Retaining bore for retaining lug of ITS head airbag retainer
2.
Retaining lug on ITS head airbag retainer
must snap into place in retaining bore
3.
ITS head airbag retainer
4.
ITS head airbag
RA Removing and installing / replacing left or right ITS head airbag (model without
BMW AG - TIS
14.02.2013 15:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 9 -
