3 Series E46 325i (M54) SAL
Unfasten screw connection on main bearing.
Remove main bearing caps (1 to 7).
Lever out crankshaft.
If necessary, release incremental gear.
Installation:
Replace screws.
Install screws and tighten down in two passes.
Tightening torque 11 21 1AZ
.
Important!
Check grinding stage of crankshaft.
Replace main crankshaft bearing shells.
Replace conrod bearing shells.
Replace grooved ball bearings in crankshaft.
RA Replacing crankshaft (M52 / S52 / M52TU / M54 / M56)
BMW AG - TIS
13.02.2013 21:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -