3 Series E46 325i (M54) SAL
Pull special tool 11 2 300 back until flywheel is no longer
secured in position.
Important!
To prevent damaging valves when fitting the camshafts, no
pistons should be in TDC position.
Lift timing chain and hold under tension.
Rotate engine against direction of engine rotation approx. 30
°
using the central bolt.
Important!
Bearing cap 1 of inlet camshaft is centered with adapter
sleeves.
To prevent inlet camshaft from tilting in bearing strip, release
nuts and remove bearing cap 1.
Fit special tool 11 3 260 to cylinder head and screw into spark
plug threads in cylinders 1 and 4.
RA Replacing camshaft (M52TU / M54 / M56)
BMW AG - TIS
13.02.2013 22:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -