3 Series E46 325i (M54) SAL
Unlock cable holders (2).
Remove cables (1) from cable holders (2).
Release screws (3).
Remove holder (4).
Release nut.
Remove grounding cables from ground support point.
Detach profile seal (1) towards top.
Installation:
To prevent leaks, you must install profile seals correctly.
Detach profile seals (1) towards top.
Installation:
To prevent leaks, you must install profile seals correctly.
E46 only:
Pull off sealing strip (1).
RA Replacing wiring harness section for engine (M54)
BMW AG - TIS
13.02.2013 23:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
