3 Series E46 325i (M54) SAL
23 00 125
Installing replacement transmission
GS5S31BZ (SMG)
Note:
After completing work:
Carry out adaptation using DIS Tester,
refer to "Service Functions" in DIS Tester.
Check transmission fluid level.
Check fluid level in hydraulic system.
Read out fault memory and clear fault entries.
Important!
Use only the approved gear oil in this manual transmission.
Failure to comply with this requirement will result in serious
damage to the transmission.
Drain off gear oil from old transmission.
Catch and dispose of emerging gear oil.
Recycling:
Observe country-specific waste-disposal regulations.
Modify following parts to new transmission:
-
Release bearing and release lever
-
Transmission breather cap (in acc. with sticker on
transmission)
-
Modify cover caps
RA Installing replacement transmission GS5S31BZ (SMG)
BMW AG - TIS
14.02.2013 01:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
