3 Series E46 325i (M54) SAL
Heat guide sleeve (1), 5th/reverse gear, to approx. 120
°
C (hot air
blower) and connect to the output shaft. If necessary, press on
with special tool 23 1 290 until tight.
Caution!
While pressing on, ensure that the detent lugs (2) catch in the
openings in the guide sleeve.
Install appropriate circlip (1). Circlips are available in Parts Service
from 2.0 ... 2.3 mm in increments of 0.05 mm.
Max. permissible end float X: 0.04 mm.
Insert 3 thrust pieces (1) with bevels outward and springs (2) in
guide sleeve openings.
Attach sliding sleeve (1) with the orientation groove (2) to the
reverse gear wheel (3).
RA Detaching and mounting all synchronizing devices S5D 200G/250G
BMW AG - TIS
14.02.2013 01:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -