3 Series E46 325i (M54) TOUR
Raise engine with special tool 00 0 200 approx. 5 mm.
Remove suction filter housing.
Remove engine splash guard.
Drain engine oil.
On vehicles with automatic transmission:
Disconnect oil lines from automatic transmission and from oil pan.
Release guide tube for dipstick.
Note:
M52 TU and M54 only.
Detach return hose from cyclone oil separator on oil dipstick guide
tube.
Remove oil dipstick guide tube upwards.
Installation:
Replace O-ring.
RA Removing and installing, sealing or replacing oil sump (M52TU / M54 / M56)
BMW AG - TIS
13.02.2013 23:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -