3 Series E46 325i (M54) TOUR
11 25 530
Removing and installing or replacing all
pistons (M52 / S52 / M52TU / M54 / M56)
Special tools required:
•
00 9 120
•
11 2 110
•
11 2 260
•
11 2 470
•
11 3 480
•
11 8 141
(engine removed)
Remove cylinder head.
Removal:
Removal of pistons is described separately from installation.
Assembly sequence for removal and installation is different.
Important!
Re-install piston, connecting rod and bearing shells back in
the same position and in the same installation location.
Connecting rods and bearing covers are designated with the
same pair number: do not mix them.
RA Removing and installing or replacing all pistons (M52 / S52 / M52TU / M54 / M56)
BMW AG - TIS
13.02.2013 23:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -