3 Series E46 325i (M54) TOUR
Fit special tool 11 3 240 to camshafts.
Note:
The timing is correctly set if the special tool 11 3 240 rests
without a gap on the cylinder head or protrudes up to 1 mm to the
inlet side.
The timing must be reset if the special tool 11 3 240 protrudes
to the exhaust side.
Unfasten and remove special tool 11 4 220 .
Install cylinder for chain tensioning piston.
RA Adjusting camshaft timing (M52TU / M54 / M56)
BMW AG - TIS
13.02.2013 23:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 8 -