3 Series E46 325i (M54) TOUR
Disconnect auxiliary lead from faulty pulse generator. Secure plug
connection of new pulse generator to auxiliary lead.
Using auxiliary lead, feed new lead of pulse generator through to
cable duct at bottom.
Installation:
Check sealing ring for possible damage, replace if necessary.
Note:
Read out fault memory of DME control unit.
Now clear the fault memory.
RA Replacing pulse generator on inlet camshaft (M52TU / M54 / M56)
BMW AG - TIS
13.02.2013 23:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -