3 Series E46 325i (M54) TOUR
13 72 001
Replacing air cleaner element (M54)
E53 only:
Open clips (1).
Lift top section (2) of intake filter housing.
E46 only:
Open clips (1).
Open retainers (2) on air-mass flow sensor.
Remove top section (3) of intake filter housing.
E85 only:
Open clips (1).
Open retainers (2) on air-mass flow sensor.
Lift top section (3) of intake filter housing.
E53, E46 and E85:
Remove air cleaner element.
Installation:
Clean top and bottom sections of intake filter housing from inside.
Install new air cleaner element.
Check seal between air-mass flow sensor and air cleaner top
section for damage, replace if necessary.
Coat seal with antiseize agent to facilitate joining of air cleaner
and throttle body.
RA Replacing air cleaner element (M54)
BMW AG - TIS
14.02.2013 00:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -