3 Series E46 325i (M54) TOUR
25 11 245
Replacing shift arm support bearing
Necessary preliminary tasks:
•
Remove underbody protection.
Necessary preliminary work (E60/E61/E63/E64
N62/N62TU/M57T2 only):
•
Remove transmission underbody protection if necessary.
•
Remove reinforcement carrier.
•
Remove exhaust system.
•
Remove heat shields.
Lever out support bearing (1) from bracket.
Pull support off shift arm.
Installation:
Insert support bearing (1) with arrow (2) pointing up into
retainer.
Detach support bearing (1) from shift arm.
Installation:
Grease bearing pin of shift arm.
Grease, refer to BMW Service Operating Fluids.
Attach support bearing (1) with opening (3) facing rear to shift
arm.
RA Replacing shift arm support bearing
BMW AG - TIS
14.02.2013 02:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -