3 Series E46 325i (M54) TOUR
Mark cutting line in cut-out area of B-pillar in centre and
completely cut through.
Measurement (A) = 220 mm from roof edge.
Alternatively:
Mark cutting line in cut-out area of B-pillar in centre and
completely cut through.
Measurement (A) = 390 mm from upper hinge fixture.
Cut cutting line, B-pillar, inside.
Determine and mark cutting line for cover for front side member:
Measurement (A) = 150 mm from centre of bore.
1 = 1st bore for finishing strip, entrance
1 = 2nd bore for finishing strip, entrance
RA Replacing cover for side member, left or right (partial replacement, B-pillar be
BMW AG - TIS
14.02.2013 10:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -