3 Series E46 325i (M54) TOUR
Coupé and Convertible:
Attach special tool 00 2 150 to ratchet and release screw on
left/right.
Installation:
Tightening torque 51 12 2AZ.
Coupé and Convertible:
Pull bumper (1) towards rear/bottom and remove screw (2)
towards front/bottom.
Version with Park Distance Control (PDC):
Unclip left cable holder (1) towards bottom.
Construction status from 12/98:
Release nut (1) on left/right.
Remove bracket (2) from bumper (3).
Installation:
Tightening torque 51 12 5AZ.
RA Removing and installing complete rear bumper
BMW AG - TIS
14.02.2013 11:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -