3 Series E46 325i (M54) TOUR
51 16 211
Removing and installing/replacing finisher for
storage tray
Version with automatic transmission only:
Remove finisher for preselector lever,
refer to 51 16 210.
Jerkily remove knob (1) for selector lever towards top.
Lift out rubber gaiter (2).
Unscrew bolts (1).
Remove finisher (2) towards rear/top.
Disconnect plug connections and remove finisher (2).
Replacement only:
Unlock lock (1),
unscrew switch (2) towards top from support (3) and remove from
finisher (4) for storage tray.
Installation:
Check function.
RA Removing and installing/replacing finisher for storage tray
BMW AG - TIS
14.02.2013 11:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -