3 Series E46 325i (M54) TOUR
Caution!
It is not the time spent pressing, but rather the pressure head
(approx. 10 ... 15 N/cm
2
) that is decisive.
Separation of seal after pressing destroys the adhesive layer.
Profile rubber adhesive must be reapplied.
Caution!
Keep adhesive cleaner away from adhesive area of seal.
Note:
Scrape off visible profile rubber adhesive with special tool
00 9 322 (plastic wedge).
If necessary, use adhesive cleaner (sourcing reference: BMW
Parts Service).
Remove positioning aids and assemble front door.
RA Removing and installing/replacing seal on front door, left or right
BMW AG - TIS
14.02.2013 13:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -