3 Series E46 325i (M54) TOUR
Removal or replacement of backrest frame only:
Caution!
Do not under any circumstances turn screw underneath screw
(2), this would destroy the seat frame.
Press backrest cover (1) to one side and release screw (2) on
left/right.
Detach backrest frame (3) with backrest cover upwards.
Installation:
Replace screws (2) (microencapsulation).
Tightening torque,
refer to Technical Data 52 10 2AZ.
Note:
The work for "Removing complete backrest" ends here.
Removal of backrest cover with padding or replacement of
backrest frame only:
Remove both guides for head restraint at front,
refer to 52 13 ...
Version with lumbar support only:
Disconnect hoses (2) and (3) from valve housing (1).
Note:
If necessary, gently heat air hose when firmly seated.
Valve housing must not be unclipped: leakage. If the valve
housing is unclipped, release screw and clip valve housing
together.
2
Hose (blue), top cushion
3
Hose (red), bottom cushion
RA Replacing backrest cover on front left or right seat (sports/electric)
BMW AG - TIS
14.02.2013 13:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -