3 Series E46 325i (M54) TOUR
64 11 200
Removing and installing/replacing heater
Remove heater bulkhead.
Warning!
Danger of scalding!
Only perform this work after engine has cooled down.
Release hose clamps (1) and (2).
Detach water hoses.
Carefully blow through lines to remove remaining coolant from
heating element.
Installation:
Fill and vent cooling system.
Release screws (2) on firewall (1).
Remove panel for instrument panel.
Remove center console.
RA Removing and installing/replacing heater
BMW AG - TIS
14.02.2013 15:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -