3 Series E46 325xi (M54) SAL
Lift off cover.
Unfasten retaining screws on torque converter (3 screws) with
special tool 24 1 110.
Tightening torque, 24 40 1AZ.
Installation:
Use only original screws.
Preassemble special tool 24 4 131 in conjunction with special
tool 24 4 137 .
Protect torque converter from slipping out. To do so, insert special
tool 24 4 131 / 24 4 137 in opening in transmission housing.
Clamp torque converter.
RA Removing and installing automatic transmission (A5S 360R / 390R, 4WD, M54)
BMW AG - TIS
14.02.2013 11:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 9 -
